Text Size

TOSHIBA new product THB6064AH

TOSHIBA new product THB6064AH

Postby Maggie » Wed Nov 23, 2011 8:30 am

If anyone know THB6064AH and test it before,please tell me the result.
Look forward your discussion.
Maggie
 
Posts: 1
Joined: Wed Nov 09, 2011 8:46 am
CNC Machine: BlackTooth

Re: TOSHIBA new product THB6064AH

Postby Tommy » Tue Nov 29, 2011 8:11 am

The THB6064AH is a PWM chopper-type sinusoidal micro-step bipolar stepping motor driver IC.
It supports 8 kind of excitation modes and forward/reverse mode and is capable of low-vibration, high-performance drive of 2-phase bipolar type stepping motors using only a clock signal.

Features
Single-chip bipolar sinusoidal micro-step stepping motor driver
Uses high withstand voltage BICD process
Forward and reverse rotation control available
Selectable phase drive (1/2, 1/8, 1/10, 1/16, 1/20, 1/32, 1/40, 1/64 step)
Output monitor pins (DOWN / ALERT)
Equipped with reset and enable pins
Built-in thermal shutdown(TSD) and over-current detection(ISD) circuit
High output withstand voltage: VDSS=50V
High output current: Iout=4.5A(peak)
Packages: HZIP25-P-1.27
Dementions:3.6*1.4*0.5 cm
Weight:9.86g

Website:[url=http://www.hhbytech.com/en/]

I bet it is going to be a perfect replacement for stk series drivers( i think they are uni-polar).It has built-in thermal and over-current protection, it will be a long life solution for the diy'rs.
This chinese company has a successfull stepper driver.
Tommy
 
Posts: 1
Joined: Wed Nov 23, 2011 8:35 am
CNC Machine: RedFrog


Return to Motion Electronics for 3D Printing

Who is online

Users browsing this forum: No registered users and 1 guest

Who is online

In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes)
Most users ever online was 158 on Thu Mar 08, 2012 8:54 pm

Users browsing this forum: No registered users and 1 guest