Text Size

Acurite power mill

Acurite power mill

Postby wojtek90 » Sun Sep 13, 2015 1:39 am

Hi
I am trying to find or create postprocessor for Acurite PowerMill for Bobcad V24 or MastercamX4 anybody can help me with it.
Thanks.
wojtek90
 
Posts: 3
Joined: Sun Sep 13, 2015 1:32 am
CNC Machine: Other

Re: Acurite power mill

Postby Awesomeness » Sun Sep 13, 2015 2:59 pm

It looks like BobCAD has an Acu-Rite post processor available for download on their site. Did you try that, and it didn't work?
If you don’t have time to do it right, when will you have time to do it over?
Image
User avatar
Awesomeness
 
Posts: 2885
Joined: Wed Feb 24, 2010 7:46 am
Location: Firestone, CO
CNC Machine: BlackFoot v4 4x8

Re: Acurite power mill

Postby wojtek90 » Sun Sep 13, 2015 7:15 pm

Thank you for replay.
No I have not. There is registration there and you have to buy service from them in order to download anything paying monthly subscription for it and I do not like it.
wojtek90
 
Posts: 3
Joined: Sun Sep 13, 2015 1:32 am
CNC Machine: Other

Re: Acurite power mill

Postby Awesomeness » Sun Sep 13, 2015 7:38 pm

No you don't. It shows 3 tiers, the first one is free. "Customer Access... Free... Features: Standard Post-Processor Downloads" http://bobcadsupport.com/

Please try a little harder to answer your own question before posting things with very obvious answers. I know some people think I'm the ass for pointing that out, but a couple more minutes of careful reading on your part would have gotten you much further, days ago, and not taken any of my time to go read it for you. I'm happy to help when you actually get stuck, or need to know where to look.
If you don’t have time to do it right, when will you have time to do it over?
Image
User avatar
Awesomeness
 
Posts: 2885
Joined: Wed Feb 24, 2010 7:46 am
Location: Firestone, CO
CNC Machine: BlackFoot v4 4x8

Re: Acurite power mill

Postby wojtek90 » Mon Sep 14, 2015 12:13 am

Thank you for advise. I got it.
wojtek90
 
Posts: 3
Joined: Sun Sep 13, 2015 1:32 am
CNC Machine: Other


Return to CAD/CAM/Control Software

Who is online

Users browsing this forum: No registered users and 3 guests

Who is online

In total there are 3 users online :: 0 registered, 0 hidden and 3 guests (based on users active over the past 5 minutes)
Most users ever online was 158 on Thu Mar 08, 2012 8:54 pm

Users browsing this forum: No registered users and 3 guests