Text Size

CNC USB 0 Feed Rate Error on DXF Import

CNC USB 0 Feed Rate Error on DXF Import

Postby C83 » Thu May 05, 2016 5:36 pm

I've been opening this DXF file in the CNC USB program for months and suddenly it's giving me an error when I try to open it or any other DXF file.

Error in GCode
Cannot move with zero feed rate (50)
Line:5 - G01 Z0.05000 F0.00

Any ideas?
Suffer the pain of discipline, or suffer the pain of regret.
C83
 
Posts: 5
Joined: Wed Aug 12, 2015 3:14 pm
Location: Kenosha, WI
CNC Machine: BlackTooth

Re: CNC USB 0 Feed Rate Error on DXF Import

Postby Awesomeness » Fri May 06, 2016 12:36 pm

F0.00 sets the feedrate to zero. Change it to something else, like F60.00.
If you don’t have time to do it right, when will you have time to do it over?
Image
User avatar
Awesomeness
 
Posts: 2885
Joined: Wed Feb 24, 2010 7:46 am
Location: Firestone, CO
CNC Machine: BlackFoot v4 4x8

Re: CNC USB 0 Feed Rate Error on DXF Import

Postby C83 » Fri May 06, 2016 3:01 pm

For some reason I had set Speed and Plunge to 0.0001 in the import settings - I must've forgotten I had changed it as I have a terrible memory for details like that. Changing the units from IN to MM allowed it to be uploaded and deleting the settings file in the program folder did as well so I knew it was some setting I screwed with recently in the program itself. After changing those back to the default all is good now; thanks for the pointer!

http://imgur.com/aXLDAch
Suffer the pain of discipline, or suffer the pain of regret.
C83
 
Posts: 5
Joined: Wed Aug 12, 2015 3:14 pm
Location: Kenosha, WI
CNC Machine: BlackTooth


Return to CAD/CAM/Control Software

Who is online

Users browsing this forum: No registered users and 1 guest

Who is online

In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes)
Most users ever online was 158 on Thu Mar 08, 2012 8:54 pm

Users browsing this forum: No registered users and 1 guest