Text Size

Book Build Machine - Scotland

Re: Book Build Machine - Scotland

Postby airnocker » Fri Jun 12, 2015 11:11 pm

Just found out my PC890 Model 8902 that was thought to work well with PreciseBits.com precision collets (which I have in 1/8", 1/4", 3/8" and 1/2" sizes) actually has some recently found TIR issues due to the taper in the router's bore. Although the TIR of the bore measured less than .0005", with the PreciseBits 1/8" collet and 1/8" Calibration Blank, I am getting .0035" TIR.

More test to do, but will update this thread.
airnocker

Everything depends on everything else
airnocker
 
Posts: 619
Joined: Thu Mar 25, 2010 9:43 pm
Location: Wellington, CO
CNC Machine: Custom

Re: Book Build Machine - Scotland

Postby keith » Mon Feb 08, 2016 1:09 pm

Phill I am wondering if you could let me know what tool you are using of Dibond material and are you ordering it from ITC in the UK?

I made need to remake the cones on my Dust extracion system and as I have a lot of scrap Dibond.....

Here is a link to the posting I just made about my Dust Extracion system...

http://www.buildyourtools.com/phpBB3/viewtopic.php?f=8&t=1063&p=24374&sid=9ca6d07353c9f532221bcaa62d85541f&sid=9ca6d07353c9f532221bcaa62d85541f#p24374

Thanks in advance :)
The Titanic was built by professionals; the Ark was built by Amateurs..........
keith
 
Posts: 591
Joined: Mon Nov 23, 2009 11:18 pm
Location: North Wales, United Kingdom
CNC Machine: BlackToe v2 4x8

Re: Book Build Machine - Scotland

Postby phill fenton » Tue Feb 23, 2016 3:50 pm

Hi Keith - sorry just seen this hence the late reply.

I have found I can get good results from using a single flute 3.2mm dia. cutter bought from places like homebase or screwfix similar to this one :- http://www.screwfix.com/p/erbauer-strai ... -1mm/13965

I use a speed of 12000 rpm and get nice clean cuts for as long as the router remains sharp.
User avatar
phill fenton
 
Posts: 155
Joined: Wed Feb 08, 2012 8:31 pm
CNC Machine: "Book" Machine

Re: Book Build Machine - Scotland

Postby keith » Mon Mar 07, 2016 1:34 pm

Many Thanks Phil, I have that very tool!!!! I will try it at the weekend and repost...
The Titanic was built by professionals; the Ark was built by Amateurs..........
keith
 
Posts: 591
Joined: Mon Nov 23, 2009 11:18 pm
Location: North Wales, United Kingdom
CNC Machine: BlackToe v2 4x8

Previous

Return to DIY

Who is online

Users browsing this forum: No registered users and 2 guests

Who is online

In total there are 2 users online :: 0 registered, 0 hidden and 2 guests (based on users active over the past 5 minutes)
Most users ever online was 158 on Thu Mar 08, 2012 8:54 pm

Users browsing this forum: No registered users and 2 guests