Text Size

pantorouter the tenoning machine

pantorouter the tenoning machine

Postby bourakai » Mon Aug 12, 2013 1:43 am

I have the blueprint. I want to build on cnc router. 90% of the plans can be adapted without modification. I work with Vectric.

if anyone is interested to be a partner in this project, send me a message ;)

Image

http://www.youtube.com/watch?list=SP7A1 ... DPrFJazD3Q

http://woodgears.ca/pantorouter/plans/
bourakai
 
Posts: 67
Joined: Fri Mar 25, 2011 8:20 pm
Location: Québec Canada
CNC Machine: BlackFoot v4 4x8

Re: pantorouter the tenoning machine

Postby BCraft » Mon Aug 12, 2013 11:21 pm

Have you purchased the plans?
You do know you can do all this on the CNC machine by mounting the stock vertically through a section of the table?
BCraft
 
Posts: 30
Joined: Fri Jul 05, 2013 12:01 am
CNC Machine: BlackFoot v4 4x8

Re: pantorouter the tenoning machine

Postby bourakai » Wed Aug 14, 2013 12:36 am

Thank you for your answer bcraft. yes I purchased the plans. I know that the parts can be machined on two sides. I do not know how to be kind of program and be specific. I thought to cut parts that problem in two and paste later. What do you think?
bourakai
 
Posts: 67
Joined: Fri Mar 25, 2011 8:20 pm
Location: Québec Canada
CNC Machine: BlackFoot v4 4x8

Re: pantorouter the tenoning machine

Postby TARUN » Wed Nov 19, 2014 7:17 am

HI Bro this is tarun
bro can i get the blueprint of pantorouter that u have, i pay little amount
so tat it will be helpful for me coz am a student i dont own tat much bucks please
TARUN
 
Posts: 1
Joined: Wed Nov 19, 2014 6:55 am
CNC Machine: None

Re: pantorouter the tenoning machine

Postby bourakai » Thu Nov 20, 2014 1:43 am

bourakai
 
Posts: 67
Joined: Fri Mar 25, 2011 8:20 pm
Location: Québec Canada
CNC Machine: BlackFoot v4 4x8

Re: pantorouter the tenoning machine

Postby Rshill » Mon Aug 01, 2016 4:05 pm

I purchased the plans from mathias with the intention of modifying them to build them on a CNC machine. I haven't got started on this yet, but I found this forum. Have you made any progress with your CNC vectric files?

Thanks,
Ryan
Rshill
 
Posts: 1
Joined: Sat Jul 23, 2016 4:48 pm
CNC Machine: Other

Re: pantorouter the tenoning machine

Postby ShenValleyCNC » Wed Aug 03, 2016 2:24 am

Hi Ryan,

I love Mathias's website and have recently built the jointer based on the pictures. I use CamBam myself as I am cheap! and I found that woodworking is easier with all the tools, so I stretch that dollar.

Mathias uses sketchup for his design work. Here is a link to a website that says you can go from Sketchup to gcode with a plugin. I have not tried it myself. Sketchup is free and according to the website, you don't need the Pro version, just the plugin.

http://www.instructables.com/id/From-SketchUp-to-CNC-Fabrication/
It always takes longer than you expect, even when you take into account Hofstadter's Law
Hofstadter's Law
User avatar
ShenValleyCNC
 
Posts: 231
Joined: Sat Mar 19, 2011 2:00 am
CNC Machine: Custom


Return to DIY

Who is online

Users browsing this forum: No registered users and 2 guests

cron

Who is online

In total there are 2 users online :: 0 registered, 0 hidden and 2 guests (based on users active over the past 5 minutes)
Most users ever online was 158 on Thu Mar 08, 2012 8:54 pm

Users browsing this forum: No registered users and 2 guests